Reference Guide

Control and Monitoring | 117
Example
Figure 5-27. Example output of show inventory for S-Series
Related
Commands
show linecard
c e
Display the line card(s) status.
Syntax
show linecard [number [brief] | all]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
FTOS#show inventory
System Type : S50N
System Mode : 1.0
Software Version : E8-4-2-399
--------------------------------------------------------------------------------
------------------------------
* 2 S50-01-GE-48T-AC DL257430183 7590005600 B CN-0RVY43-28298-82B-0456
1B2 SVCTGCH 628 458 864 65
2 S50-01-12G-2S N/A N/A N/A N/A N/
A N/A N/A
2 S50-PWR-AC N/A N/A N/A N/A N/
A N/A N/A
2 S50-FAN N/A N/A N/A N/A N/
A N/A N/A
* - Management Unit
show interfaces interface configuration.
show interfaces
transceiver
Display the physical status and operational status of an installed transceiver. The
output also displays the transceiver’s serial number.
number
(OPTIONAL) Enter a slot number to view information on the line card in that slot.
C-Series Range: 0-7
E-Series Range: 0 to 13 on a E1200, 0 to 6 on a E600, and 0 to 5 on a E300.
all (OPTIONAL) Enter the keyword all to view a table with information on all present line
cards.
brief (OPTIONAL) Enter the keyword brief to view an abbreviated list of line card
information.
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.5.1.0 Introduced on C-Series
E-Series original Command