Reference Guide

1148 | Port Monitoring
www.dell.com | support.dell.com
show running-config monitor session
c e s
Display the running configuration of all monitor sessions or a specific session.
Syntax
show running-config monitor session {session-ID}
To display the running configuration for all monitor sessions, use just the show running-config
monitor session command.
Parameters
Defaults
No default values or behavior
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Usage
Information
The monitoring command is saved in the running configuration at the Monitor Session mode level and
can be restored after a chassis reload.
Related
Commands
session-ID
(OPTIONAL) Enter a session identification number.
Range: 0 to 65535
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.7.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
Version 7.4.1.0 Introduced on E-Series
FTOS#show running-config monitor session
!
monitor session 8
source GigabitEthernet 10/46 destination GigabitEthernet 10/1 direction rx
!
monitor session 11
source GigabitEthernet 10/0 destination GigabitEthernet 10/47 direction rx
FTOS#show running-config monitor session 11
!
monitor session 11
source GigabitEthernet 10/0 destination GigabitEthernet 10/47 direction rx
monitor session Create a session for monitoring.
show monitor session Display a monitor session.