Reference Guide

1138 | Power over Ethernet (PoE)
www.dell.com | support.dell.com
Command Modes
EXEC
EXEC Privilege
Command
History
Example
FTOS(conf-if-range-gi-0/1-48)#do show power detail
Unit Total Logic Inline Inline Inline Inline
Power Power Power Power Power Power
Available Consumed Available Allocated Consumed Remaining
(Watts) (Watts) (Watts) (Watts) (Watts) (Watts)
-------------------------------------------------------------------------------
0 470.00 150 320.00 308.00 190.00 12.00
Related
Commands
show power inline
c s
Display the ports that are enabled with PoE and the amount of power that each is consuming.
Syntax
show power inline
Command Modes
EXEC
EXEC Privilege
Command
History
Version 8.4.1.0 Inline Power Used removed from output.
Version 7.7.1.0 Introduced on S-Series
Version 4.2.1.0 Introduced on C-Series
Table 43-1. show power detail Command Output Fields
Unit (S-Series only) The stack member unit ID.
Catalog Name (C-Series only) Displays the component’s Dell Force10 catalog number.
Slot ID (C-Series only) Displays the slot number in which the line card or RPM is
installed.
Total Power Available The total power available in the stack member or chassis.
Note: On the S-Series a maximum of 790W can be allocated for PoE,
even if you add the 470W external power supply.
Logic Power Consumed The power consumed by the system logic.
Inline Power Available
Power available for PoE (whatever was configured using the
power-budget
command. Default: 320 watts
Inline Power Allocated Total power allocated to the ports.
Inline Power Consumed Total power consumed by connected devices.
Inline Power Remaining Difference between power available and power allocated.
power inline Enable power to be supplied to a device connected to a port.
power inline priority Set the PoE priority of the selected port
Version 8.4.1.0 Operational Status removed from output.
Version 7.7.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series