Reference Guide

PIM-Source Specific Mode (PIM-SSM) | 1133
IPv6 PIM Commands
The following commands apply to IPv6 PIM-SM and PIM-SSM:
• clear ipv6 pim tib
• debug ip pim
• ipv6 pim dr-priority
• ipv6 pim join-filter
• ipv6 pim query-interval
• ipv6 pim neighbor-filter
• show ipv6 pim interface
• show ipv6 pim neighbor
• show ipv6 pim tib
IPv6 PIM-Source Specific Mode Commands
The IPv6 PIM-SSM commands are:
• ipv6 pim ssm-range
• show ipv6 pim ssm-range
ipv6 pim ssm-range
e
Specify the SSM group range using an access-list.
Syntax
ipv6 pim ssm-range {access_list_name}
Parameters
Defaults
Default SSM range is 232/8 and ff3x/32
Command Modes
CONFIGURATION
Command
History
Usage
Information
Once the SSM range is applied, the changes are applied internally without requiring clearing of the
TIB. SSM ACL overrides the default range. To use the default range while SSM range is active, add
the default range to the SSM ACL.
When ACL rules change, the ACL manager and PIM modules apply the new rules automatically.
Version 7.7.1.0 Introduced on C-Series.
Version 7.5.1.0 Introduced on E-Series.
access_list_name
Enter the name of the access list. Maximum 16 characters.
Version 7.5.1.0 Introduced