Reference Guide

PIM-Source Specific Mode (PIM-SSM) | 1131

PIM-Source Specific Mode (PIM-SSM)

Overview

The platforms on which a command is supported is indicated by the character — e for the E-Series,

c for the C-Series, and s for the S-Series — that appears below each command heading.

PIM is supported on E-Series ExaScale e

with FTOS 8.1.1.0. and later.

This chapter contains the following sections:

• IPv4 PIM Commands

• IPv4 PIM-Source Specific Mode Commands

• IPv6 PIM Commands

• IPv6 PIM-Source Specific Mode Commands

IPv4 PIM Commands

The following commands apply to IPv4 PIM-SM, PIM-SSM, and PIM-DM:

• clear ip pim tib

• debug ip pim

• ip pim dr-priority

• ip pim graceful-restart

• ip pim neighbor-filter

• ip pim query-interval

• show ip pim interface

• show ip pim neighbor

• show ip pim tib

IPv4 PIM-Source Specific Mode Commands

The IPv4 PIM-Source Specific Mode (PIM-SSM) commands are:

• ip pim ssm-range

• ip pim join-filter

• show ip pim ssm-range