Reference Guide

Control and Monitoring | 113
show inventory (C-Series and E-Series)
c e
Display the chassis type, components (including media), FTOS version including hardware
identification numbers and configured protocols.
Syntax
show inventory [media slot]
Parameters
Defaults
No default behavior or values
Command Modes
CONFIGURATION
Command
History
Usage
Information
The show inventory media command provides some details about installed pluggable media (SFP,
XFP), as shown in Figure 5-25. Use the show interfaces command to get more details about
installed pluggable media.
The display output might include a double asterisk (**) next to the SFMs, for example:
...
0 CC-E-SFM ** 0004875 7490007411 A
1 CC-E-SFM ** 0004889 7490007411 A
...
The double asterisk generally indicates the SFM’s frequency capabilities, indicating either that they are
operating at 125 MHz or that the frequency capability, which is stored in an EPROM, cannot be
determined.
If there are no fiber ports in the line card, then just the header under show inventory media will be
displayed. If there are fiber ports but no optics inserted, then the output will display “Media not present
or accessible.”C300 Example
media slot (OPTIONAL) Enter the keyword media followed by the slot number.
C-Series Range: 0-7
E-Series Range: 0 to 13 on a E1200, 0 to 6 on a E600/E600i, and 0 to 5 on a E300
Version 8.1.1.0 Introduced on E-Series ExaScale
Version 7.8.1.0 Output expanded to include SFP+ media in C-Series.
Version 7.7.1.0
Vendor field removed from output of
show inventory media.
Version 7.5.1.0 Introduced on C-Series and expanded to include transceiver media
Version 6.2.1.0 Expanded to include Software Protocol Configured field on E-Series
Version 5.3.1.0 Introduced on E-Series