Reference Guide

1120 | PIM-Sparse Mode (PIM-SM)
www.dell.com | support.dell.com
IPv6 PIM-Sparse Mode Commands
The IPv6 PIM-SM commands are:
• ipv6 pim bsr-border
• ipv6 pim bsr-candidate
• ipv6 pim dr-priority
• ipv6 pim join-filter
• ipv6 pim query-interval
• ipv6 pim neighbor-filter
• ipv6 pim register-filter
• ipv6 pim rp-address
• ipv6 pim rp-candidate
• ip pim sparse-mode
• ipv6 pim spt-threshold
• show ipv6 pim bsr-router
• show ipv6 pim interface
• show ipv6 pim neighbor
• show ipv6 pim rp
• show ipv6 pim tib
clear ipv6 pim tib
e
Clear the IPv6 PIM multicast-routing database (tree information base—tib).
Syntax
clear ipv6 pim tib [group-address]
Parameters
Defaults
No default values or behavior
Command Modes
EXEC Privilege
Command
History
Related
Commands
debug ipv6 pim
e
Invoke IPv6 PIM debugging.
Syntax
debug ipv6 pim [bsr | events | group group | packet | register [group] | state | | timer [assert
| hello | joinprune | register]]
To disable IPv6 PIM debugging, enter no debug ipv6 pim.
group-address (OPTIONAL) Enter the multicast group address in the x:x:x:x::x format.
The
:: notation specifies successive hexadecimal fields of zero.
Version 7.4.1.0 Introduced
show ipv6 pim tib Display the IPv6 PIM tree information base (tib)