Reference Guide

PIM-Sparse Mode (PIM-SM) | 1119

show running-config pim

Display the current configuration of PIM-SM snooping.

Syntax

show running-config pim

Command Modes

EXEC Privilege

Command

History

Commands

Example

Command Example: show running-config pim

flags List the flags to define the entries:

• D = PIM Dense Mode

• S = PIM Sparse Mode

• C = directly connected

• L = local to the multicast group

• P = route was pruned

• R = the forwarding entry is pointing toward the RP

• F = FTOS is registering this entry for a multicast source

• T = packets were received via Shortest Tree Path

• J = first packet from the last hop router is received and the entry is

ready to switch to SPT

• K = acknowledge pending state

Incoming interface Displays the reverse path forwarding (RPF) interface towards the RP/

source.

RPF neighbor Displays the next hop from this interface towards the RP/source.

Outgoing interface list: Lists the interfaces that meet one of the following criteria:

• a directly connect member of the Group.

• statically configured member of the Group.

• received a (*,G) Join message.

Table 41-6. show ip pim tib Command Example Fields (continued)

Field Description

Version 8.4.1.0 Introduced on E-Series ExaScale.

ip pim snooping Enable PIM-SM snooping.

FTOS#show running-config pim

ip pim snooping enable