Reference Guide

PIM-Sparse Mode (PIM-SM) | 1113
Example 3
Figure 41-7. show ip pim rp group-address Command Example 3
show ip pim snooping interface
e
x
Display information on VLAN interfaces with PIM-SM snooping enabled.
Syntax
show ip pim snooping interface [vlan vlan-id]
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 41-8. show ip pim snooping interface Command Example
FTOS#sh ip pim rp 229.1.2.1
Group RP
229.1.2.1 165.87.20.4
FTOS#
vlan vlan-id
(OPTIONAL) Enter a VLAN ID to display information about a specified VLAN
configured for PIM-SM snooping. Valid VLAN IDs: 1 to 4094.
Version 8.4.1.1 Introduced on E-Series ExaScale
Table 41-3. show ip pim snooping interface Command Example Fields
Field Description
Interface Displays the VLAN interfaces with PIM-SM snooping enabled.
Ver/Mode Displays the PIM version number for each VLAN interface with PIM-SM
snooping enabled:
• v2 = PIM version 2
• S = PIM Sparse mode
Nbr Count Displays the number of neighbors learned through PIM-SM snooping on
the interface.
DR Prio Displays the Designated Router priority value configured on the interface
(ip pim dr-priority command).
DR Displays the IP address of the Designated Router for that interface.
FTOS#show ip pim snooping interface
Interface Ver Nbr DR DR
Count Prio
Vlan 2 v2 3 1 165.87.32.2