Reference Guide

PIM-Sparse Mode (PIM-SM) | 1099
clear ip pim snooping tib
c e s
Clear tree information discovered by PIM-SM snooping from the PIM database.
Syntax
clear ip pim snooping tib [vlan vlan-id] [group-address]
Parameters
Command Modes
EXEC Privilege
Command
History
Related
Commands
debug ip pim
c e s
View IP PIM debugging messages.
Syntax
debug ip pim [bsr | events | group | packet [in | out] | register | state | timer [assert | hello |
joinprune | register]]
To disable PIM debugging, enter no debug ip pim, or enter undebug all to disable all debugging.
Parameters
Defaults
Disabled
Command Modes
EXEC Privilege
vlan vlan-id
(OPTIONAL) Enter a VLAN ID to clear TIB information learned through PIM-SM
snooping about a specified VLAN. Valid VLAN IDs: 1 to 4094.
group-address (OPTIONAL) Enter a multicast group address in dotted decimal format (A.B.C.D) to
clear TIB information learned through PIM-SM snooping about a specified multicast
group.
Version 8.4.1.1 Introduced on E-Series ExaScale
show ip pim snooping tib Display TIB information learned through PIM-SM snooping.
bsr (OPTIONAL) Enter the keyword bsr to view PIM Candidate RP/BSR
activities.
events (OPTIONAL) Enter the keyword events to view PIM events.
group (OPTIONAL) Enter the keyword group to view PIM messages for a specific
group.
packet [in | out] (OPTIONAL) Enter the keyword packet to view PIM packets. Enter one of
the optional parameters
• in: to view incoming packets
• out: to view outgoing packets.
register (OPTIONAL) Enter the keyword register to view PIM register address in
dotted decimal format (A.B.C.D).
state (OPTIONAL) Enter the keyword state to view PIM state changes.
timer [assert | hello |
joinprune | register]
(OPTIONAL) Enter the keyword
timer to view PIM timers. Enter one of the
optional parameters:
• assert: to view the assertion timer.
• hello: to view the PIM neighbor keepalive timer.
• joinprune: to view the expiry timer (join/prune timer)
• register: to view the register suppression timer.