Reference Guide

PIM-Sparse Mode (PIM-SM) | 1097

PIM-Sparse Mode (PIM-SM)

Overview

The platforms on which a command is supported is indicated by the character — e for the E-Series,

c for the C-Series, and s for the S-Series — that appears below each command heading.

PIM is supported on E-Series ExaScale e

with FTOS 8.1.1.0. and later.

This chapter contains the following sections:

• IPv4 PIM-Sparse Mode Commands

• IPv6 PIM-Sparse Mode Commands

IPv4 PIM-Sparse Mode Commands

The IPv4 PIM-Sparse Mode (PIM-SM) commands are:

• clear ip pim rp-mapping

• clear ip pim tib

• clear ip pim snooping tib

• debug ip pim

• ip pim bsr-border

• ip pim bsr-candidate

• ip pim dr-priority

• ip pim graceful-restart

• ip pim join-filter

• ip pim ingress-interface-map

• ip pim neighbor-filter

• ip pim query-interval

• ip pim register-filter

• ip pim rp-address

• ip pim rp-candidate

• ip pim snooping

• ip pim sparse-mode

• ip pim sparse-mode sg-expiry-timer

• ip pim spt-threshold

• no ip pim snooping dr-flood

• show ip pim bsr-router