Reference Guide

Control and Monitoring | 107
Parameters
Defaults
None
Command Mode
EXEC
EXEC Privilege
Command
History
Usage
Information
show cpu-traffic-stats
c e s
View the CPU traffic statistics.
Syntax
show cpu-traffic-stats [port number | all | cp | linecard {all | slot# } | rp1 | rp2 ]
Parameters
Defaults
all
Command Modes
EXEC
Command
History
number
Enter the line card slot number.
Range: 0–7 for the C300
Range: 0–13 for the E1200
Range: 0–6 for the E600
Range: 0–5 for the E300
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
Caution: Use this command only when you are working directly with a technical support
representative to troubleshoot a problem. Do not use this command unless a technical
support representative instructs you to do so.
port number
(OPTIONAL) Enter the port number to display traffic statistics on that port only.
Range: 1 to 1568
all (OPTIONAL) Enter the keyword all to display traffic statistics on all the interfaces
receiving traffic, sorted based on traffic.
cp (OPTIONAL) Enter the keyword cp to display traffic statistics on the specified
CPU.
Note: This option is supported on E-Series only.
linecard (OPTIONAL) Enter the keyword linecard followed by either all or the slot
number to display traffic statistics on the designated line card.
Note: This option is supported on C-Series only.
rp1 (OPTIONAL) Enter the keyword rp1 to display traffic statistics on the RP1.
Note: This option is supported on E-Series only.
rp2 (OPTIONAL) Enter the keyword rp2 to display traffic statistics on the RP2.
Note: This option is supported on E-Series only.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
Version 6.2.1.1 Introduced on E-Series