Reference Guide

Open Shortest Path First (OSPFv2 and OSPFv3) | 1067
Command
History
Example
Figure 38-23. debug ipv6 ospf packet Command Example
default-information originate
c e
Configure FTOS to generate a default external route into the OSPFv3 routing domain.
Syntax
default-information originate [always [metric metric-value] [metric-type type-value]]
[route-map map-name]
To return to the default, use the no default-information originate command.
Parameters
Version 7.8.1.0 Added support for C-Series
Version 7.4.1.0 Introduced
Table 38-15. debug ip ospf Output Fields
Field Description
OSPFv3... Debugging is on for all OSPFv3 packets and all interfaces
05:21:01 Displays the time stamp.
Sending Ver:3 Sending OSPF3 version.
Type: Displays the type of packet sent:
• 1 - Hello packet
• 2 - database description
• 3 - link state request
• 4 - link state update
• 5 - link state acknowledgement
Length: Displays the packet length.
Router ID: Displays the OSPF3 router ID.
Area ID: Displays the Area ID.
Chksum: Displays the OSPF3 checksum.
FTOS#debug ipv6 ospf packet
OSPFv3 packet related debugging is on for all interfaces
05:21:01 : OSPFv3: Sending, Ver:3, Type:1(Hello), Len:40, Router
ID:223.255.255.254, Area ID:0, Inst:0, on Po 255
05:21:03 : OSPFv3: Received, Ver:3, Type:1(Hello), Len:40, Router
ID:223.255.255.255, Area ID:0, Chksum:a177, Inst:0, from Vl 100
05:20:25 : OSPFv3: Sending, Ver:3, Type:4(LS Update), Len:580, Router
ID:223.255.255.254, Area ID:0, Inst:0, on Vl 1000
FTOS#
always (OPTIONAL) Enter the keyword always to indicate that default route
information must always be advertised.
metric metric-value (OPTIONAL) Enter the keyword metric followed by the number to
configure a metric value for the route.
Range: 1 to 16777214