Reference Guide

1050 | Open Shortest Path First (OSPFv2 and OSPFv3)
www.dell.com | support.dell.com
Related
Commands
show ip ospf database summary
c e s
Display the network summary (type 3) LSA routing information.
Syntax
show ip ospf process-id database summary [link-state-id] [adv-router ip-address]
Parameters
Table 38-8. Command Example Descriptions: show ip ospf process-id database router
Item Description
LS Age Displays the LSA age.
Options Displays the optional capabilities available on router. The following options can
be found in this item:
• TOS-capability or No TOS-capability is displayed depending on whether the
router can support Type of Service.
• DC or No DC is displayed depending on whether the originating router can
support OSPF over demand circuits.
• E or No E is displayed on whether the originating router can accept AS
External LSAs.
LS Type Displays the LSA type.
Link State ID Displays the Link State ID.
Advertising Router Identifies the router ID of the LSA’s originating router.
LS Seq Number Displays the link state sequence number. This number detects duplicate or old
LSAs.
Checksum Displays the Fletcher checksum of an LSA’s complete contents.
Length Displays the length in bytes of the LSA.
Number of Links Displays the number of active links to the type of router (Area Border Router or
AS Boundary Router) listed in the previous line.
Link connected to: Identifies the type of network to which the router is connected.
(Link ID) Identifies the link type and address.
(Link Data) Identifies the router interface address.
Number of TOS Metric Lists the number of TOS metrics.
TOS 0 Metric Lists the number of TOS 0 metrics.
show ip ospf database Displays OSPF database information.
process-id
Enter the OSPF Process ID to show a specific process.
If no Process ID is entered, command applies only to the first OSPF process.
link-state-id
(OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value depends
on the LSA type, and it can be one of the following:
• the network’s IP address for Type 3 LSAs or Type 5 LSAs
• the router’s OSPF router ID for Type 1 LSAs or Type 4 LSAs
• the default destination (0.0.0.0) for Type 5 LSAs
adv-router
ip-address
(OPTIONAL) Enter the keywords
adv-router ip-address to display only the LSA
information about that router.