Installation guide

Force10 Node Manager Guide, version 1.5.0 111
no shutdown Use this option to enable the interfaces. If you choose no shutdown, Node
Manager displays this dialog box:
Leave the box unchecked and click OK to start the interfaces.
MTU setting Use this option to define a link Maximum Transmission Unit (MTU) size for the
interface. If you select this option, Node Manager displays this dialog box:
Figure 79 MTU Dialog Box (S50 Ports)
Enter the Link MTU setting you want to assign to the interfaces. Your
permissible range is 1518 to 9216 bytes. Click OK to complete the action.
command Use this option to enter brief CLI commands that apply to all of the interfaces
you selected. If you choose this option, Node Manager displays this dialog box:
Figure 80 CLI Command Dialog Box (S50)
Enter the text of your CLI command and click OK to carry it out.
Step Task