Configuration manual

308 | Content Addressable Memory for ExaScale
www.dell.com | support.dell.com
Microcode
A microcode is a compiled set of instructions for the FPTM. On Dell Force10 systems, the microcode
controls how packets are sent through the lookup tables and ultimately forwarded through the system.
L2PT 0-1024 entries 0-1024 entries
L2 QOS 0-16 K 0-16 K
L3 FIB 16-892 K 16-64 K
L3 Ingress ACL 1-256 K 1-16 K
L3 Egress ACL 2-256 K 2-16 K
L3 Flow - -
Multicast-FIB 0-32 K 0-16 K
PBR 0-32 K 0-16 K
QOS 0-32 K 0-16 K
System Flow 2-32 K 2-16 K
IPv6 FIB 0-128 K 0-8 K
IPv6 Egress ACL 0-64 K 0-4 K
IPv6 Ingress ACL 0-64 K 0-4 K
IPv6 Flow - -
Multicast-FIB 0-32 K 0-8 K
PBR 0-32 K 0-8 K
QOS 0-32 K 0-8 K
System Flow 0-32 K 0-8 K
MPLS 0-256 K 0-256 K
Note: Not all maximum values have been qualified by Dell Force10.
Table 12-4. Minimum and Maximum CAM/SRAM Region Values (continued)
Partition 40M CAM 10M CAM