Configuration manual

Content Addressable Memory for ExaScale | 307
CAM/SRAM region minimums and maximums
You can create your own CAM-profiles. They are created the same way the CAM-profile templates are
created (Select a CAM-profile template), except that you define the region allocations rather than using the
Dell Force10 calculations.
Table lists the minimum and maximum values allowed for each region. Remember: the total CAM/SRAM
space is finite and adding entries to one region must decrease the range available to other regions.
QOS 1K 1K 10K 10K 10K 10K
System Flow 4K 2K 4K 4K 4K 4K
IPv6 FIB 0 4K 8K 0 12K 0
IPv6 Egress ACL 0 1K 2K 0 1K 0
IPv6 Ingress ACL 0 2K 4K 0 6K 0
IPv6 Flow - - - - - -
Multicast-FIB 0 3K 4K 0 3K 0
PBR 000000
QOS 0 0 0 0 1K 0
System Flow 0 2K 4K 0 2K 0
MPLS 0 0 0 0 60K 0
Note: The CAM-profile templates listed in Table 12-1 have been qualified by Dell Force10. Dell Force10
does not certify that user-defined templates will function as expected.
Table 12-4. Minimum and Maximum CAM/SRAM Region Values
Partition 40M CAM 10M CAM
L2FIB 7-256 K 2-64 K
L2 Ingress ACL 2-256 K 1-32K
L2 Egress ACL 2-256 K 1-32 K
L2 Learning 1-16K 1-16 K
L2 Flow - -
L2 System Flow 102-1024 entries 102-1024 entries
FRRP 0-1024 entries 0-1024 entries
Table 12-3. CAM-profile Template Allocations
Partition 10M-L2
10M-L2-IPv6-
Switching
40M-L2
IPv6-IPv4
40M
L2-IPv4Only VRF
MAX-IPv4
-FIB