Configuration manual

E-Series ExaScale Debugging and Diagnostics | 1267
Follow these steps to locate the line card core dump files. The mini core dump file is a text (.txt) file so it
can be easily read. The full core dump files are gz files and can only be read by Dell Force10 TAC.
The panic string contains key information regarding the crash. Several panic string types exist. The content
of the string appears in english text. In the above output, SRESET refers to a loss of communication
between CP and RP. The CP assumes the RP kernel is hung and forces the RP into a reset state.
Step Task Syntax Command Mode
1 List the files in the directory.
dir
EXEC Privilege
Force10#dir
Directory of flash:
1 drwx 8192 Jan 01 1980 00:00:00 +00:00 .
2 drwx 512 Jun 17 2009 12:27:15 +00:00 ..
3 drwx 4096 Nov 09 2007 19:55:38 +00:00 CORE_DUMP_DIR
2 Change the directory to
CORE_DUMP_DIR.
cd CORE_ DUMP_DIR
EXEC Privilege
3 List the files in the directory.
dir
EXEC Privilege
Force10#cd CORE_DUMP_DIR
Force10#dir
Directory of flash:/CORE_DUMP_DIR
1 drwx 8192 May 12 2025 03:39:54 +00:00
2 drwx 32768 Jan 01 1980 00:00:00 +00:00
5 -rwx 16384 Dec 03 2008 16:47:52 +00:00 f10lp2.kcore.mini.txt
6 -rwx 154555270 Nov 20 2008 18:57:38 +00:00 f10lp13.acore.gz
4 Show the content of a txt file.
show file filename
EXEC Privilege
Force10#show file f10lp2.kcore.mini.txt
PANIC STRING
------------------------------
panic string is :RSET trap
STACK TRACE START
--------------------------
00232794 <f10_save_mmu+0x1a0>: