Configuration manual

1256 | E-Series ExaScale Debugging and Diagnostics
www.dell.com | support.dell.com
Identify a suspect SFM
Step Task Command Mode
1 Capture the link status view from the SFM.
show hardware sfm all tsf
link-status
EXEC Privilege
In this example. SFM7 has a failure reported against 3 line cards.
Force10#show hardware sfm all tsf link-status
Collecting s3PrintLocalChStat for all SFM
Status Of S3 Links(Channel) Toward LC Slot 0 From All SFMs
Number Of Links Failed : 2
{SFM-7 <--> PP-0 DOWN} [Bit Map Of Failed Links = 0x00400000]
{SFM-7 <--> PP-1 DOWN} [Bit Map Of Failed Links = 0x00100000]
Status Of S3 Links(Channel) Toward LC Slot 1 From All SFMs
Number Of Links Failed : 0
-- output truncated --
Status Of S3 Links(Channel) Toward LC Slot 6 From All SFMs
Number Of Links Failed : 2
{SFM-7 <--> PP-0 DOWN} [Bit Map Of Failed Links = 0x00000004]
{SFM-7 <--> PP-1 DOWN} [Bit Map Of Failed Links = 0x00000002]
Status Of S3 Links(Channel) Toward LC Slot 7 From All SFMs
Number Of Links Failed : 2
{SFM-7 <--> PP-0 DOWN} [Bit Map Of Failed Links = 0x00000400]
{SFM-7 <--> PP-1 DOWN} [Bit Map Of Failed Links = 0x00000200]
2 Display the link status view from the line cards.
show hard linecard {0-13 |all}
port-set all tsf link-status
EXEC Privilege
In this example, SFM7 has an internal link issue reported by two line cards
Force10#show hardware linecard 6 port-set all tsf link-status
Status Of S3 Links(Channel) From LC Slot 0 To All SFMs
Number Of Links Failed : 2
Bit Map Of Failed Links : [PP-0 = 0x10000000] [PP-1 = 0x10000000]
{SFM-7 <--> PP-0 DOWN} {SFM-7 <--> PP-1 DOWN}
Force10#show hardware linecard 7 port-set all tsf link-status
Status Of S3 Links(Channel) From LC Slot 0 To All SFMs
Number Of Links Failed : 2
Bit Map Of Failed Links : [PP-0 = 0x10000000] [PP-1 = 0x10000000]
{SFM-7 <--> PP-0 DOWN} {SFM-7 <--> PP-1 DOWN}