Configuration manual

FTOS XML Feature | 1179

The second command in this XML request also makes an invalid request:

<?xml version="1.0" encoding="UTF-8"?>

<cli>

<command>ip access standard test1</command>

<command>no permit host 2.2.3.4 log count bytes</command>

</configuration>

</cli>

</request>

The error response contains a <responseSeverity> of “APPLICATION_ERROR”, <responseSeverity> of

“APPLICATION_ERROR” and a <responseMsg> of “% Error: Access-list entry does not exist.”

Using display xml as a Pipe Option

Also, at a CLI prompt in EXEC privilege mode (“enable mode”), you can retrieve XML-formatted

responses to the show commands supported by XML (see the list of supported show commands in the

section XML Functionality on page 1169). The following table describes how to format a show command

with a pipe option that will request that the show command report be presented with XML formatting.

As shown in the following Figure 60-3, FTOS formats the response with the XML tags from the same

response schema used by the XML response, discussed in The “Show” Request and Response on

page 1172. For more on pipe options, see Filtering show Command Outputs on page 45.

Command Syntax Command Mode Purpose

show keyword | display xml EXEC privilege FTOS treats “ | display xml” as a request to format the show

command report in XML format.