Specifications

Installing the S2410 | 17

Figure 4-2. S2410 Two-post (Front-mounted) Rack-mounting

Four-Post Rack-mounting with Threaded Rails

Ensure that there is adequate clearance surrounding the cabinet or rack to permit access and airflow. If

you are installing two S2410 systems side-by-side, position the two S2410 chassis at least 5 inches (12.7

cm) apart to permit proper airflow.

Attach the rack ears first, using only the supplied screws (see

Attaching the Rack Ears on page 15

), and

then follow the steps below to install the S2410 chassis into a four-post 19-inch equipment rack, using the

attached front mounting brackets and the optional adjustable rear-mounting brackets.

Step Task

1 Align the three screw holes of the adjustable rear mounting bracket with the three holes in the S2410 chassis, and

secure the mounting bracket with three screws.

Figure 4-3. Four-post Rack-mounting with Adjustable Rear-mounting Brackets, Step 1

fn00147as241

752-00313-00F2(4-post1)