Quick Start Manual

Installing the Software 23
IP configuration takes precedence over VLAN configuration on a port.
Therefore, configuring an IP Address and routing on an interface disables
participation in VLANs on that interface.
Connecting the S2410 to the Network
Once you have completed the hardware installation and software configuration
for the S2410, you can connect to your company network by following your
company’s cabling requirements.
Step Task Command Syntax Command Mode
1 Enables routing for the switch. ip routing Global Config
2 Configures an IP address on an
interface. The IP address may be
a secondary IP address.
ip address Interface Config