Quick Reference Guide

System Configuration Commands | 89
The no version of this command disables automatic speed negotiation on a port.
Mode
Interface Config; Interface Range, which is indicated by the (conf-if-range-interface)# prompt, such as
(conf-if-range-vlan 10-20)#.
Command
History
auto-negotiate all
This command enables automatic speed negotiation on all ports. The default value is enable.
The no version of this command disables automatic speed negotiation on all ports.
Syntax
[no] auto-negotiate all
Mode
Global Config
bridge aging-time
This command configures the forwarding database address aging timeout in seconds. In an SVL
system, the [fdbid/all] parameter is not used and will be ignored if entered.
Syntax
bridge aging-time seconds
The command no bridge aging-time sets the forwarding database address aging timeout to the
default of 300 seconds.In an SVL system, the [fdbid/all] parameter is not used and will be ignored if
entered.
Default
300
Mode
Global Config In an SVL system, the [fdbid/all] parameter is not used and will be ignored if entered.
Command
History
Version 2.3 Interface Range mode added
Related
Commands
interface range Defines an interface range and accesses the Interface Range mode
speed Manually set the port speed.
Related
Commands
interface range Defines an interface range and accesses the Interface Range mode
speed all Manually set the same port speed for all ports.
Parameters
seconds In place of seconds, enter a number between 10 and 1,000,000 to indicate
the number of seconds before the timeout.
Version 2.3 Modified: Removed parameters and statements relating to IVL.