Quick Reference Guide

System Management Commands | 81
Default
0.0.0.0
Mode
Global Config
snmp-server community mode
This command activates an SNMP community. If a community is enabled, an SNMP manager
associated with this community manages the switch according to its access right. If the community is
disabled, no SNMP requests using this community are accepted. In this case, the SNMP manager
associated with this community cannot manage the switch until the status is changed back to
Enable.The no version of this command deactivates an SNMP community. If the community is
disabled, no SNMP requests using this community are accepted. In this case the SNMP manager
associated with this community cannot manage the switch until the Status is changed back to Enable.
Syntax
[no] snmp-server community mode name
Default
Enable
Mode
Global Config
snmp-server community ro
This command restricts access to switch information. The access mode is read-only (also called
public).
Syntax
snmp-server community ro name
Mode
Global Config
snmp-server community rw
This command restricts access to switch information. The access mode is read/write (also called
private).
Syntax
snmp-server community rw name
Mode
Global Config
snmp-server enable traps bcaststorm
This command enables sending Broadcast Storm traps.
Syntax
[no] snmp-server enable traps bcaststorm
The no version of this command disables the sending of Broadcast Storm traps.
Default
enabled