Quick Reference Guide

72 | System Management Commands
www.dell.com | support.dell.com
The time is a decimal value from 1to 160.
The no ip telnet timeout command sets the Telnet connection session timeout value, in minutes, to
the default.
Default
5 (minutes)
Mode
Global Config
Command
History
ip telnet server enable
Enable or disable Telnet services.
Syntax
[no] telnet server enable
Mode
Global Config
Command
History
Related
Commands
session-limit
This command specifies the maximum number of simultaneous outbound telnet sessions. A value of 0
indicates that no outbound telnet session can be established.
Syntax
session-limit 0-5
Use no session-limit to set the maximum number of simultaneous outbound telnet sessions to the
default value.
Default
5
Mode
Line Config
session-timeout
This command sets the outbound Telnet session timeout value.
Syntax
[no] session-timeout 1-160
The timeout value unit of time is minutes.
The no version of this command sets the outbound Telnet session timeout value to the default.
Version 2.3
Changed from
telnetcon timeout and moved from Privileged Exec mode to Global
Config.
Version 2.3 Modified: Moved from Privileged Exec mode to Global Config mode.
ip ssh server enable Enable/disable SSH services.