Quick Reference Guide

64 | System Management Commands
www.dell.com | support.dell.com
show network
Command
History
Related
Commands
show process cpu
The output from this command displays current switch memory used by application, in percentage
form and in a list of all currently running tasks, along with their individual usage.
Syntax
show process cpu
Mode
Privileged Exec
Command
History
Example
Figure 5-19. Example of Output from the show process cpu Command
Usage
This command shows only memory used by application tasks. In contrast, show memory shows the
entire system memory usage, including tasks created by the operating system and the application layer
(SFTOS).
Related
Commands
Version 2.3
Deprecated: The keyword
managementethernet in the command show interface
provides the information that had been available through this command.
show interface
managementethernet
Displays information about the management address of the switch.
Version 2.5.1 Introduced
Note also that the show tech-support command now includes the output
of this command.
(Force10) #show process cpu
Memory Utilization Report
status bytes
------ ----------
free 95145000
alloc 109810976
Task Utilization Report
Task Utilization
----------------------- -----------
osapiTimer 5.00%
bcmCNTR.0 0.20%
bcmCNTR.1 0.40%
bcmL2X.2 0.60%
bcmCNTR.2 0.60%
bcmL2X.3 0.60%
bcmCNTR.3 0.20%
bcmL2X.4 0.60%
bcmCNTR.4 0.40%
bcmRX 0.50%
SNMPCfgTask 0.10%
RMONTask 0.10%
show memory Displays current memory usage in bytes in tabular format.
show tech-support
Displays the output of several show commands.