Quick Reference Guide

System Management Commands | 59
show interface switchport
This command displays a summary of statistics on Layer 2 interfaces.
Syntax
show interface switchport
Mode
Privileged Exec
Usage
Information
The display parameters of show interface, when the argument is switchport, are as follows:
Related
Commands
show interfaces
This command displays information about a selected interface or VLAN.
Table 5-10. Fields in Output of show interface switchport Command
Field Description
Packets Received Without Error The total number of packets (including broadcast packets and
multicast packets) received by the processor.
Broadcast Packets Received The total number of packets received that were directed to the
broadcast address. Note that this does not include multicast
packets.
Packets Received With Error The number of inbound packets that contained errors
preventing them from being deliverable to a higher-layer
protocol.
Packets Transmitted Without Error The total number of packets transmitted out of the interface.
Broadcast Packets Transmitted The total number of packets that higher-level protocols
requested to be transmitted to the Broadcast address,
including those that were discarded or not sent.
Transmit Packet Errors The number of outbound packets that could not be
transmitted because of errors.
Address Entries Currently In Use The total number of Forwarding Database Address Table
entries now active on the switch, including learned and static
entries.
VLAN Entries Currently In Use The number of VLAN entries presently occupying the VLAN
table.
Time Since Counters Last Cleared The elapsed time, in days, hours, minutes, and seconds since
the statistics for this switch were last cleared.
ip address (management) Configures the IP address of the management interface.
show interface Displays statistics for a specific port.
show interface
managementethernet
Displays information about the management interface.
show interface ethernet Displays detailed statistics for a specific ethernet port or for all CPU traffic
based upon the argument.
show interfaces Displays information about a selected interface or VLAN