Quick Reference Guide

50 | System Management Commands
www.dell.com | support.dell.com
show interface ethernet
This command displays detailed statistics for a specific port or for all CPU traffic based upon the
argument.
Syntax
show interface ethernet {switchport | unit/slot/port | 1-3965}
Parameters
Mode
Privileged Exec
Command
History
Usage
Information
This command displays distinctly different reports, depending on the entered parameter.
Figure 5-12 shows an example of the show interface ethernet report when the keyword
switchport is added. Table 5-7 on page 51 contains an explanation of the report fields.
Figure 5-13 shows an example of the show interface ethernet report when the argument is unit/
slot/port. Table 5-8 on page 52 contains an explanation of the report fields.
show interface
managementethernet
Displays information about the management interface to the switch.
show interfaces port-channel Displays detailed statistics for a specific LAG or summary information for all
LAGs, based upon the argument.
show ip interface Displays summary information about IP configuration settings for all ports in
the router.
show interfaces Displays information about a selected interface or VLAN
switchport
The display parameters for when switchport is entered, are shown below
the list for
unit/slot/port.
unit/slot/port
,
Valid unit, slot and, port number, separated by forward slashes. The display
parameters are shown below.
1-3965
VLAN ID
Version 2.5.1 Modified: Many report fields changed