Quick Reference Guide

PIM Commands | 495
Component BSR Expiry Time—This field displays the minimum time remaining before the BSR in the
local domain will be declared down.
Component CRP Hold Time—This field displays the hold time of the component when it is a candidate.
show ip pimsm interface
This command displays the interface information for PIM-SM on the specified interface.
Syntax
show ip pimsm interface unit/slot/port
Mode
Privileged Exec and User Exec
Unit/Slot/Port—Valid unit, slot and port number separated by forward slashes.
IP Address—This field indicates the IP address of the specified interface.
Subnet Mask—This field indicates the Subnet Mask for the IP address of the PIM interface.
Mode—This field indicates whether PIM-SM is enabled or disabled on the specified interface. This is a
configured value. By default it is disabled.
Hello Interval—This field indicates the frequency at which PIM hello messages are transmitted on this
interface. This is a configured value. By default, the value is 30 seconds.
CBSR Preference—This field shows the preference value for the local interface as a candidate
bootstrap router. This is a configured value.
CRP Preference—This field shows the preference value as a candidate rendezvous point on this
interface.
CBSR Hash Mask Length—This field shows the hash mask length to be advertised in bootstrap
messages if this interface is elected as the bootstrap router. The value is used in the hash algorithm for
selecting the RP for a particular group.
show ip pimsm interface stats
This command displays the statistical information for PIM-SM on the specified interface.
Syntax
show ip pimsm interface stats {unit/slot/port | all}
The no version of this command
Mode
Privileged Exec and User Exec
Unit/Slot/Port—Valid unit, slot and port number separated by forward slashes.
IP Address—This field indicates the IP Address that represents the PIM-SM interface.
Subnet Mask—This field indicates the Subnet Mask of this PIM-SM interface.