Quick Reference Guide

PIM Commands | 493
ip pimsm staticrp
This command is used to create the RP IP address for the PIM-SM router.
Syntax
[no] ip pimsm staticrp ipaddress groupaddress groupmask
The ipaddress is the IP address of the RP. The groupaddress is the group address supported by the
RP. The groupmask is the group mask (regular form) for the group address.
The no version of this command is used to delete the RP IP address for the PIM-SM router.
Default
disabled
Mode
Global Config
show ip pimsm rphash
This command displays the RP router that will be selected from the set of active RP routers. The RP
router, for the group, is selected by using the hash algorithm defined in RFC 2362.
Syntax
show ip pimsm rphash groupaddress
Mode
Privileged Exec and User Exec
RP IP Address—This field displays the IP address of the RP.
Group Mask—This field displays the group mask for the group address.
show ip pimsm staticrp
This command displays the static RP information for the PIM-SM router.
Syntax
show ip pimsm staticrp
Mode
Privileged Exec and User Exec
RP IP Address—This field displays the IP address of the RP.
Group Address—This field displays the group address supported by the RP.
Group Mask—This field displays the group mask for the group address.
show ip pimsm
This command displays the system-wide information for PIM-SM.
Syntax
show ip pimsm
The no version of this command