Quick Reference Guide

PIM Commands | 487
Syntax
show ip pimdm
Mode
Privileged Exec and User Exec
PIM-DM Admin Mode—This field indicates whether PIM-DM is enabled or disabled. This is a configured
value.
Unit/Slot/Port—Valid unit, slot and port number separated by forward slashes.
Interface Mode—This field indicates whether PIM-DM is enabled or disabled on this interface. This is a
configured value.
State—This field indicates the current state of PIM-DM on this interface. Possible values are
Operational or Non-Operational.
show ip pimdm interface
This command displays the interface information for PIM-DM on the specified interface.
Syntax
show ip pimdm interface unit/slot/port
The no version of this command
Mode
Privileged Exec and User Exec
Interface Mode—This field indicates whether PIM-DM is enabled or disabled on the specified interface.
This is a configured value.
PIM-DM Interface Hello Interval—This field indicates the frequency at which PIM hello messages are
transmitted on this interface. By default, the value is 30 seconds.
show ip pimdm interface stats
This command displays the statistical information for PIM-DM on the specified interface.
Syntax
show ip pimdm interface stats {unit/slot/port | all}
The no version of this command
Mode
Privileged Exec and User Exec
Interface—Valid unit, slot and port number separated by forward slashes.
IP Address—This field indicates the IP Address that represents the PIM-DM interface.
Nbr Count—This field displays the neighbor count for the PIM-DM interface.
Hello Interval—This field indicates the time interval between two hello messages sent from the router on
the given interface.
Designated Router—This indicates the IP Address of the Designated Router for this interface.