Quick Reference Guide

ManualsBrandsDell ManualsComputer equipmentForce10 S2410-01-10GE-24P

481

482

483

484

485

486

487

488

489

490

IP Multicast Commands | 481

Querier IP Address on Proxy Interface — The IP address of the querier, if any, in the network attached

to the upstream interface (IGMP-Proxy interface).

Older Version 1 Querier Timeout — The interval used to time out the older version 1 queriers.

Older Version 2 Querier Timeout — The interval used to time out the older version 2 queriers.

Proxy Start Frequency — The number of times the IGMP Proxy has been stopped and started.

show ip igmp-proxy interface

If you first you enable IGMP Proxy, this command displays a detailed list of the host interface status

parameters.

Syntax

show ip igmp-proxy interface

Mode

Privileged Exec and User Exec

Command

History

Report Fields Interface index — The unit/slot/port of the IGMP proxy

The column headings of the table associated with the interface are as follows:

Ver — IGMP version

Query Rcvd — Number of IGMP queries received

Report Rcvd — Number of IGMP reports received

Report Sent — Number of IGMP reports sent

Leaves Rcvd — Number of IGMP leaves received

Leaves Sent — Number of IGMP leaves sent

Commands

ip igmp (global) Sets the administrative mode of IGMP in the router to active.

ip igmp (VLAN) Sets the administrative mode of IGMP for the selected VLAN to active

ip igmp-proxy When used without parameters, this command enables/disables the IGMP Proxy on the

router. When used with the

reset-status keyword, this command resets the host

interface status parameters of the IGMP Proxy router. When used with

unsolicit-report-interval, this command sets the unsolicited report interval for the

IGMP Proxy router.

Version 2.5.1 Introduced