Quick Reference Guide

472 | IP Multicast Commands
www.dell.com | support.dell.com
Default
disabled
Mode
Interface VLAN
Command
History
ip igmp last-member-query-count
This command sets the number of group-specific queries sent before the router assumes that there are
no local members on the interface or VLAN.
The no version of this command resets the number of Group-Specific Queries to the default value.
Syntax
ip igmp last-member-query-count count
no ip igmp last-member-query-count
The range for count is 1 to 20.
Mode
Interface Config or Interface VLAN
Command
History
ip igmp last-member-query-interval
This command configures the Maximum Response Time being inserted into group-specific queries
sent in response to Leave Group messages on the interface or VLAN.
The no version of this command resets the Maximum Response Time being inserted into
Group-Specific Queries sent in response to Leave Group messages on the interface to the default value.
Syntax
ip igmp last-member-query-interval seconds
no ip igmp last-member-query-interval
The range for seconds is 0 to 255 tenths of a second.
Default
10 tenths of a second (1 second)
Mode
Interface Config or Interface VLAN
Command
History
Version 2.3 Introduced
Version 2.3 Modified: Added Interface VLAN mode.
Version 2.3 Modified: Added Interface VLAN mode.