Quick Reference Guide

IP Multicast Commands | 471
IGMP Commands
This section provides a detailed explanation of the Internet Group Management Protocol (IGMP)
commands available in the Layer 3 package.
This section contains the following commands:
• ip igmp (global) on page 471
• ip igmp last-member-query-count on page 472
• ip igmp last-member-query-interval on page 472
• ip igmp-proxy on page 473
• ip igmp query-interval on page 473
• ip igmp query-max-resp-time on page 474
• ip igmp robustness on page 474
• ip igmp startup-query-count on page 474
• ip igmp startup-query-interval on page 475
• ip igmp version on page 475
• show ip igmp on page 476
• show ip igmp groups on page 476
• show ip igmp interface on page 477
• show ip igmp interface membership on page 479
• show ip igmp interface stats on page 479
• show ip igmp-proxy on page 480
• show ip igmp-proxy interface on page 481
• show ip igmp-proxy groups on page 482
• show ip igmp-proxy groups detail on page 482
See also the IGMP Snooping commands in IGMP Snooping Commands on page 273.
ip igmp (global)
This command enables IGMP on the router.
Syntax
ip igmp
Use no ip igmp to set the administrative mode of IGMP in the router to inactive.
Default
disabled
Mode
Global Config
ip igmp (VLAN)
This command sets the administrative mode of IGMP for the selected VLAN to active.
Syntax
ip igmp
Use no ip igmp to set the administrative mode of IGMP for the selected VLAN to inactive.