Quick Reference Guide

System Management Commands | 47
Table 5-4. Fields in the Output of the show hardware Command
Related
Commands
show interface
This command displays a summary of statistics for a specific port or for the entire switch, depending
on the argument.
Syntax
show interface {unit/slot/port | ethernet {switchport | unit/slot/port | 1-3965} | loopback |
managementethernet | switchport}
Parameters
Mode
Privileged Exec
Command
History
Field Description
Switch Description Text used to identify the product name of this switch
Vendor ID Number used to identify the manufacturer of the device
Plant ID
Country Code
Date Code Month and year of manufacture of the switch
Serial Number The unique box serial number for this switch
Part Number Manufacturing part number
Revision
Catalog Number The catalog number of the switch
Burned in MAC Address Universally assigned network address
Software Version The version of the SFTOS software currently running on the switch, expressed as
base release.version.revision.
Additional Packages The software modules that are incorporated into this version of SFTOS
show cx4-cable-length Displays CX4 cable lengths connected to the system.
show tech-support
Displays the output of many
show commands, including this one.
unit/slot/port
,
Enter the port number of a particular port to query, where unit is the stack
member, slot is always 0 (zero), and port is the port number. The display
parameters are shown below.
ethernet {switchport |
unit/slot/port | 1-3965}
See show interface ethernet on page 50.
loopback
See show interface loopback on page 99.
managementethernet
See show interface managementethernet on page 57.
switchport
Enter the keyword to display a summary of statistics on Layer 2 interfaces.
See show interface switchport on page 59.
Version 2.5.1 Modified: Added port channel options and Native VLAN information to VLAN output.
Many report fields changed.