Quick Reference Guide

468 | IP Multicast Commands
www.dell.com | support.dell.com
Mode
Privileged Exec and User Exec
Report Fields Admin Mode—This field indicates whether DVMRP is enabled or disabled. This is a configured value.
Version String—This field indicates the version of DVMRP being used.
Number of Routes—This field indicates the number of routes in the DVMRP routing table.
Reachable Routes—This field indicates the number of entries in the routing table with non-infinite
metrics.
The following fields are displayed for each interface.
Unit/Slot/Port—Valid unit, slot and port number separated by forward slashes.
Interface Mode—This field indicates the mode of this interface. Possible values are Enabled and
Disabled.
State—This field indicates the current state of DVMRP on this interface. Possible values are Operational
or Non-Operational.
show ip dvmrp interface
This command displays the interface information for DVMRP on the specified interface.
Syntax
show ip dvmrp interface unit/slot/port
Mode
Privileged Exec and User Exec
Report Fields Interface Mode—This field indicates whether DVMRP is enabled or disabled on the specified interface.
This is a configured value.
Metric—This field indicates the metric of this interface. This is a configured value.
Local Address—This is the IP Address of the interface.
This Field is displayed only when DVMRP is operational on the interface.
Generation ID—This is the Generation ID value for the interface. This is used by the neighboring routers
to detect that the DVMRP table should be resent.
The following fields are displayed only if DVMRP is enabled on this interface.
Received Bad Packets—This is the number of invalid packets received.
Received Bad Routes—This is the number of invalid routes received.
Sent Routes—This is the number of routes that have been sent on this interface.
show ip dvmrp neighbor
This command displays the neighbor information for DVMRP.