Quick Reference Guide

IP Multicast Commands | 463
Group IP Addr—This field displays the IP address of the destination of the multicast packet.
Protocol—This field displays the multicast routing protocol by which this entry was created.
Incoming Interface—This field displays the interface on which the packet for this source/group arrives.
Outgoing Interface List—This field displays the list of outgoing interfaces on which this packet is
forwarded.
show ip mcast mroute group
This command displays the multicast configuration settings such as flags, timer settings, incoming and
outgoing interfaces, RPF neighboring routers, and expiration times of all the entries in the multicast
mroute table containing the given groupipaddr.
Syntax
show ip mcast mroute group groupipaddr {detail |summary}
Mode
Privileged Exec and User Exec
Report Fields Source IP Addr—This field displays the IP address of the multicast data source.
Group IP Addr—This field displays the IP address of the destination of the multicast packet.
Protocol—This field displays the multicast routing protocol by which this entry was created.
Incoming Interface—This field displays the interface on which the packet for this group arrives.
Outgoing Interface List—This field displays the list of outgoing interfaces on which this packet is
forwarded.
show ip mcast mroute source
This command displays the multicast configuration settings such as flags, timer settings, incoming and
outgoing interfaces, RPF neighboring routers, and expiration times of all the entries in the multicast
mroute table containing the given sourceipaddr or sourceipaddr [groupipaddr] pair.
Syntax
show ip mcast mroute source sourceipaddr {summary | groupipaddr}
Mode
Privileged Exec and User Exec
Report Fields
If the detail parameter is specified the follow fields are displayed:
Source IP Addr—This field displays the IP address of the multicast data source.
Group IP Addr—This field displays the IP address of the destination of the multicast packet.
Expiry Time—This field displays the time of expiry of this entry in seconds.
Up Time—This field displays the time elapsed since the entry was created in seconds.
RPF Neighbor—This field displays the IP address of the RPF neighbor.
Flags—This field displays the flags associated with this entry.