Manualshelf

Quick Reference Guide

ManualsBrandsDell ManualsComputer equipmentForce10 S2410-01-10GE-24P
451452453454455456457458459460
RIP Commands | 455
show ip rip interface brief
This command displays general information for each RIP interface. For this command to display
successful results routing must be enabled per interface (i.e. ip rip).
Syntax
show ip rip interface brief
Mode
Privileged Exec and User Exec
Unit/Slot/Port—Valid unit, slot and port number separated by forward slashes.
IP Address—The IP source address used by the specified RIP interface.
Send Version—The RIP version(s) used when sending updates on the specified interface. The types
are none, RIP-1, RIP-1c, RIP-2.
Receive Version—The RIP version(s) allowed when receiving updates from the specified interface. The
types are none, RIP-1, RIP-2, Both
RIP Mode—RIP administrative mode of router RIP operation; enable activates, disable de-activates it.
Link State—The mode of the interface (up or down).
show ip rip interface
This command displays information related to a particular RIP interface.
Syntax
show ip rip interface <unit/slot/port>
Mode
Privileged Exec and User Exec
Interface—Valid unit, slot and port number separated by forward slashes. This is a configured value.
IP Address—The IP source address used by the specified RIP interface. This is a configured value.
Send version—The RIP version(s) used when sending updates on the specified interface. The types are
none, RIP-1, RIP-1c, RIP-2. This is a configured value.
Receive version—The RIP version(s) allowed when receiving updates from the specified interface. The
types are none, RIP-1, RIP-2, Both. This is a configured value.
Both RIP Admin Mode—RIP administrative mode of router RIP operation; enable activates, disable
de-activates it. This is a configured value.
Link State—Indicates whether the RIP interface is up or down. This is a configured value.
Authentication Type—The RIP Authentication Type for the specified interface. The types are none,
simple, and encrypt. This is a configured value.
Default Metric—A number which represents the metric used for default routes in RIP updates originated
on the specified interface. This is a configured value.
The following information will be invalid if the link state is down.