Quick Reference Guide

418 | Routing Commands
www.dell.com | support.dell.com
ip vrrp priority
This command sets the priority value for the virtual router configured on a specified interface.
Syntax
ip vrrp vrID priority 1-254
The parameter vrID is the virtual router ID, which is an integer that ranges from 1 to 255.
The priority of the interface is an integer from 1 to 254.
The no ip vrrp vrID priority command sets the default priority value for the virtual router configured
on a specified interface.
Default
100
Mode
Interface Config; Interface VLAN; Interface Range, which is indicated by the
(conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#.
Command
History
ip vrrp timers advertise
This command sets the advertisement value for a virtual router.
Syntax
ip vrrp vrID timers advertise 1-255
The parameter vrID is the virtual router ID, which is an integer that ranges from 1 to 255.
The value for advertise interval is the time used for VRRP advertisements in seconds.
The no ip vrrp vrID timers advertise command sets the default advertisement value for a virtual
router.
Default
1
Mode
Interface Config; Interface VLAN; Interface Range, which is indicated by the
(conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#.
Command
History
Version 2.3 Added Interface Range and Interface VLAN modes.
Related
Commands
interface range Defines an interface range and accesses the Interface Range mode
interface vlan Creates a VLAN and assigns it an ID, and then enters the Interface VLAN mode, which
provides access to VLAN configuration commands for the specified VLAN.
ip vrrp <vrID> Sets the VRID (virtual router ID) on an interface for virtual router configuration in the
router. This command also has options.
Version 2.3 Added Interface Range and Interface VLAN modes.
Related
Commands
interface range Defines an interface range and accesses the Interface Range mode