Quick Reference Guide

Routing Commands | 417
Syntax
[no] ip vrrp vrID mode
The parameter vrID is the virtual router ID, which has an integer value ranging from 1 to 255.
The no version of this command disables the virtual router configured on the specified
interface. Disabling the status field stops a virtual router.
Default
disabled
Mode
Interface Config; Interface VLAN; Interface Range, which is indicated by the
(conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#.
Command
History
ip vrrp preempt
This command sets the preemption mode value for the virtual router configured on a specified
interface.
Syntax
[no] ip vrrp vrID preempt
The parameter vrID is the virtual router ID which has an integer value range from 1 to 255.
The no version of this command sets the default preemption mode value for the virtual router
configured on a specified interface.
Default
enabled
Mode
Interface Config; Interface VLAN; Interface Range, which is indicated by the
(conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#.
Command
History
Version 2.3 Added Interface Range and Interface VLAN modes.
Related
Commands
interface range Defines an interface range and accesses the Interface Range mode
interface vlan Creates a VLAN and assigns it an ID, and then enters the Interface VLAN mode, which
provides access to VLAN configuration commands for the specified VLAN.
ip vrrp <vrID> Sets the VRID (virtual router ID) on an interface for virtual router configuration in the
router. This command also has options.
Version 2.3 Added Interface Range and Interface VLAN modes.
Related
Commands
interface range Defines an interface range and accesses the Interface Range mode
interface vlan Creates a VLAN and assigns it an ID, and then enters the Interface VLAN mode, which
provides access to VLAN configuration commands for the specified VLAN.
ip vrrp <vrID> Sets the VRID (virtual router ID) on an interface for virtual router configuration in the
router. This command also has options.