Quick Reference Guide

414 | Routing Commands
www.dell.com | support.dell.com
VLAN ID—Is the identifier of the VLAN.
Logical Interface—Indicates the logical
unit/slot/port associated with the VLAN routing interface.
IP Address—Displays the IP Address associated with this VLAN.
Subnet Mask—Indicates the subnet mask that is associated with this VLAN.
vlan routing
Command
History
Virtual Router Redundancy Protocol (VRRP) Commands
This section provides a detailed explanation of the VRRP commands. The commands are divided by
functionality into the following different groups:
• Show commands are used to display switch settings, statistics and other information.
• Configuration Commands are used to configure features and options of the switch. For every
configuration command there is a show command that will display the configuration setting.
The commands in this section are, in order:
• ip vrrp (global) on page 414
• ip vrrp <vrID> on page 415
• ip vrrp authentication on page 415
• ip vrrp ip on page 416
• ip vrrp mode on page 416
• ip vrrp preempt on page 417
• ip vrrp priority on page 418
• ip vrrp timers advertise on page 418
• show ip vrrp interface stats on page 419
• show ip vrrp on page 420
• show ip vrrp interface on page 420
• show ip vrrp interface brief on page 420
ip vrrp (global)
This command enables the administrative mode of VRRP in the router. This command also designates
the configured virtual router IP address as a secondary IP address on an interface.
The no version of this command disables the default administrative mode of VRRP in the router.
Syntax
[no] ip vrrp
Version 2.3 Deprecated. Replaced by ip address (VLAN).
Related
Commands
ip address (VLAN)
Assigns an IP address and subnet mask to the selected VLAN.