Quick Reference Guide

396 | Routing Commands
www.dell.com | support.dell.com
Example
Figure 22-128. show arp Command Example
Report Fields Age Time (seconds)—The time, in seconds, for an ARP entry to age out, as configured into the unit
Response Time (seconds)—The time, in seconds, it takes for an ARP request timeout, as configured
into the unit
Retries—The maximum number of times an ARP request is retried, as configured into the unit
Cache Size—The maximum number of entries in the ARP table, as configured into the unit
Dynamic Renew Mode—Displays whether the ARP component automatically attempts to renew
dynamic ARP entries when they age out.
Total Entry Count Current / Peak—The total entries in the ARP table and the peak entry count in the
ARP table.
Static Entry Count Current / Max—The static entry count in the ARP table and maximum static entry
count in the ARP table.
(Force10 ) #show arp brief
Age Time (seconds)............................. 1200
Response Time (seconds)........................ 1
Retries........................................ 4
Cache Size..................................... 1920
Dynamic Renew Mode ............................ Enable
Total Entry Count Current / Peak .............. 0 / 0
Static Entry Count Configured / Active / Max .. 0 / 0 / 64
Related
Commands
show arp Displays detailed Address Resolution Protocol (ARP) information
show arp switch Displays connectivity between the switch and other devices