Quick Reference Guide

System Management Commands | 39
The value for ipaddr is the IP Address of the management interface.
The value for subnetmask is a 4-digit dotted-decimal number which represents the subnet mask of the
interface.
Enter no ip address to remove the IP Address and subnet mask.
Mode
Interface ManagementEthernet — (Config-if-ma)# prompt within the Global Config mode
Command
History
Related
Commands
mac-address
Configure the MAC address to be used for the management VLAN.
Syntax
mac-address mac-address
Default
None
Mode
Interface ManagementEthernet
Command
History
Related
Commands
mac-type
Configure the MAC address to be used for the management VLAN.
Syntax
mac-type {local | burnedin}
Default
None
Mode
Interface ManagementEthernet
Version 2.3 Introduced: Replaces the network parms command for the IP address and subnet mask
components of the management address.
management route default Sets the IP gateway of the switch.
interface managementethernet Invokes the Interface ManagementEthernet mode.
ip address (routed) Configures an IP address on a routed interface.
show interface Displays a summary of statistics for a specific port, including
the management port, or a count of all CPU traffic based upon
the argument.
Version 2.3
Introduced. Replaces the network mac-address
command.
management route default Sets the IP gateway of the switch.
interface managementethernet Invokes the Interface ManagementEthernet mode, the
(Config-if-ma)# prompt.