Quick Reference Guide

382 | ACL Commands
www.dell.com | support.dell.com
Mode
Interface Config (including Interface Loopback Config) and Interface Range, which is indicated by the
(conf-if-range-interface)# prompt, such as (conf-if-range-vlan 10-20)#.
Command
History
Related
Commands
ip access-group all
This command attaches a specified IP access control list to all interfaces.
Syntax
ip access-group all ACLnumber [1 – 4294967295] in
Default
none
Mode
Global Config
show ip access-lists
This command displays an IP Access Control List (ACL) and all of the rules that are defined for the
ACL. The ACLnumber is the number used to identify the ACL.
Syntax
show ip access-lists [ACLnumber]
Parameters
Mode
Privileged Exec and User Exec
Example
Figure 21-124. Command Example: show ip access-lists
Version 2.3 Interface Range mode added
interface range Defines an interface range and accesses the Interface Range mode.
access-list Creates an IP access control list.
ip address (routed) configures an IP address on a routed interface.
ip access-group (port channel) Attaches an ACL to the selected port channel.
show ip access-lists Displays an IP Access Control List (ACL) and all of the rules that are defined
for the ACL.
ACLnumber
Enter the ACL ID in the range of 1 to 199.
Force10-S50 #show ip access-lists
Current number of ACLs: 3 Maximum number of ACLs: 100
ACL ID Rules Direction Interface(s)
------ ----- ---------- -------------------------
1 38 inbound 1/0/48
2 1
3 1