Quick Reference Guide

Quality of Service (QoS) Commands | 377

Command

History

Commands

Pkt Limit (Conf) The packet limit allocation, as configured

Pkt Limit (Actual) The packet limit allocation, as it is before reboot sets the value to the configured

value

Table 20-25. Fields of show buffer unit Command Output (continued)

Field Description

Version 2.5.1 Introduced

buffer check Verify that the configured buffer allocations meet the hardware requirements.

buffer dedicated (1G and

stacking ports)

Set buffer sizes per port and per queue for ports 1 – 48 and the stack port on

the S50, and ports 1 – 52 and the stack port on the S50V.

buffer dynamic (1G and stack

ports)

Set dynamic buffer sizes per port for ports 1 – 48 and the stack port on the

S50, and ports 1 – 52 and the stack port on the S50V

show buffer unit Display configured values for dedicated buffers, dynamic buffers, and packet

limits for

each port in an S50, S50V, or S25P, as well as the actual settings

from the switch hardware.