Quick Reference Guide

Quality of Service (QoS) Commands | 369
Defaults
Equal allocation per queue
Mode
Global Config
Command
History
Usage
Information
For example, to set the buffer to 50k in each buffer on port 1/0/1 in unit 1 in an S50 stack, the
command would be buffer dedicated interface 1/0/1 50 50 50 50 50 50 50.
Related
Commands
buffer dedicated interface (10G ports)
This command sets buffer sizes per port and per queue for ASICs controlling the optional 10Gb ports
49 and 50 on the S50 and the 10Gb ports on the S25P.
Syntax
[no] buffer dedicated interface unit/slot/port Queue-0_buffer Queue-1_buffer Queue-2_buffer
Queue-3_buffer Queue-4_buffer
Queue-5_buffer Queue-6_buffer
Use the no buffer dedicated interface unit/slot/port command syntax to return buffers to their
default values.
Version 2.5.1 Introduced
buffer check Verify that the configured buffer allocations meet the hardware requirements.
buffer dedicated interface
(10G ports)
Set buffer sizes per port and per queue for ASICs controlling the optional 10GB
ports 49 and 50 on the S50 and the 10Gb ports on the S25P.
buffer dynamic (1G and
stack ports)
Set dynamic buffer sizes per port for ports 1 – 48 and the stack port on the S50,
and ports 1 – 52 and the stack port on the S50V.
show buffer unit Display configured values for dedicated buffers, dynamic buffers, and packet
limits for
each port in an S50, S50V, or S25P, as well as the actual settings from
the switch hardware.
show buffer allocation
interface
Display configured and actual static buffer allocation and packet allocation
values per queue for the
selected port in an S50, S50V, or S25P.