Quick Reference Guide

358 | Quality of Service (QoS) Commands
www.dell.com | support.dell.com
Show Commands
The commands in this section are:
• show class-map on page 358
• show diffserv on page 359
• show policy-map on page 362
• show diffserv service on page 360
• show diffserv service brief on page 361
• show policy-map interface on page 363
• show service-policy on page 364
The DiffServ show commands display configuration and status information for:
• Classes
• Policies
• Services
This information can be displayed in either summary or detailed formats. The status information is
only shown when the DiffServ administrative mode is enabled; it is suppressed otherwise.
There is also a show command for general DiffServ information that is available at any time.
show class-map
This command displays all configuration information for the specified class.
Syntax
show class-map [classname]
Parameters
Mode
Privileged Exec and User Exec
Example
Figure 20-118. Example of show class-map Command
classname
(Optional) Enter an existing DiffServ class name. Class names must be
composed of alphanumeric characters.
Force10 #show class-map
Class
Class Name Type Reference Class Name
------------------------------- ----- -------------------------------