Quick Reference Guide

316 | Spanning Tree (STP) Commands
www.dell.com | support.dell.com
Mode
Global Config
spanning-tree bpdumigrationcheck
Use this command to force a transmission of rapid spanning tree (RSTP) and multiple spanning tree
(MSTP) BPDUs.
Syntax
spanning-tree bpdumigrationcheck {unit/slot/port | all}
To transmit a BPDU from a specified interface, use its unit/slot/port.
To transmit BPDUs from all interfaces, use the all keyword.
This command forces the BPDU transmission when you execute it, so the command does not change
the system configuration or have a no version.
Mode
Global Config
Command
History
spanning-tree configuration name
This command sets the Configuration Identifier Name for use in identifying the configuration that this
switch is currently using. The name is a string of at most 32 characters.
The no version of this command resets the Configuration Identifier Name to its default.
Syntax
[no] spanning-tree configuration name name
Default
The base MAC address displayed using hexadecimal notation as specified in IEEE 802 standard.
Mode
Global Config
spanning-tree configuration revision
This command sets the Configuration Identifier Revision Level for use in identifying the configuration
that this switch is currently using. The Configuration Identifier Revision Level is a number in the range
of 0 to 65535.
The no version of this command sets the Configuration Identifier Revision Level for use in identifying
the configuration that this switch is currently using to the default value, in other words, 0.
Syntax
spanning-tree configuration revision 0-65535
Related
Commands
spanning-tree (LAG) Sets the spanning-tree operational mode on the selected port channel
spanning-tree port mode
enable all
Version 2.3 Modified: Moved from Privileged Exec mode to Global Config mode.