Quick Reference Guide

300 | LAG/Port Channel Commands
www.dell.com | support.dell.com
Command
History
port lacptimeout (global)
This command sets the Link Aggregation Control Protocol (LACP) timeout on all ports.
The no version of this command removes the Link Aggregation Control Protocol (LACP) timeout on
all ports.
Syntax
[no] port lacptimeout {short all | long all}
Mode
Global Config
port lacptimeout (interface)
This command sets the Link Aggregation Control Protocol (LACP) timeout on the selected port(s).
The no version of this command removes the Link Aggregation Control Protocol (LACP) timeout on
the selected port(s).
Syntax
[no] port lacptimeout {short | long}
Mode
Interface Config; Interface Range
Command
History
Version 2.5
Deprecated. Use
protocol lacp and protocol static.
Version 2.3
Revised from [
no] port lacpmode all
Related
Commands
interface range Defines an interface range and accesses the Interface Range mode
protocol lacp Reenables LACP on a LAG.
protocol static Converts a LAG from LACP to static.
Parameters
short all Enter short all to select the short timeout setting (3 seconds) for all ports.
long all Enter long all to select the long timeout setting (90 seconds) for all ports.
Related
Commands
port lacptimeout (interface) Set the LACP timeout on the selected port(s).
Parameters
short Enter short to select the short timeout setting (3 seconds) for the selected ports.
long Enter long to select the long timeout setting (90 seconds) for the selected ports.
Version 2.3 Added Interface Range mode.
Related
Commands
interface Accesses the Interface Config mode for the selected interface.
interface range Defines an interface range and accesses the Interface Range mode
port lacptimeout (global) Set the Link Aggregation Control Protocol (LACP) timeout on ports.