Quick Reference Guide

298 | LAG/Port Channel Commands
www.dell.com | support.dell.com
port-channel enable all (global)
This command enables the administrative mode for all port channel (LAGs).
The no version of this command disables all port channels (LAGs).
Syntax
port-channel enable all
Mode
Global Config
Command
History
port-channel enable (interface)
This command enables the selected port channel (LAG).
The no version of this command disables the selected port channel (LAG).
Syntax
[no] port-channel enable
Mode
Interface Config
Command
History
port-channel linktrap
This command enables link trap notifications for all port channels (LAGs) or for a selected port
channel.
The no version of this command disables link trap notifications for the selected port channel.
Syntax
[no] port-channel linktrap {unit/slot/port | all}
The interface is a logical unit/slot/port for a configured port channel.
The option all sets every configured port channel with the same administrative mode setting.
Default
enabled
Mode
Global Config
Related
Commands
show interfaces
port-channel
Displays an overview of all port channels (LAGs) on the switch or details on the
selected LAG.
addport Add a port to a LAG. LAG ports must be physical ports, not other LAGs.
Version 2.3
Replaced
adminmode with enable.
Version 2.3
Replaced
adminmode with enable.
Related
Commands
interface Accesses the Interface Config mode for the selected port channel (LAG).